192.168.188.1 Admin Setup – Is Your Extender Not Broadcasting SSID?
Are you facing the issue of extenders not broadcasting SSID? It is counted as one of the most crucial issues linked with the extenders. Due to this, the users are unable to connect with the network of the extender. Yes, you will find a number of issues when extenders do not broadcast the SSID. In this small guide, you will learn about the troubleshooting ways to get rid of the problem of wifi range extenders not broadcasting the network name. Make sure you use the 192.168.188.1 admin setup details properly.
Let’s learn about the same!
How To Fix The Issue Of Extender Not Broadcasting SSID?
The very first thing is to make sure that’s your computer system is connected to the extender.
If you want to know whether the extender is broadcasting the SSID or not, the ping test will help you with that. Following are the steps to do the Ping test.
- Switch your system home
- To perform the pink test you will need to know the IP address of your extender.
- Run the Command Prompt on your Windows PC
- Type ping followed by the IP address of your Linksys
- extender once the Command Prompt window opens.
- After you’re done with everything, press the enter key in the last.
After that, you need to confirm if you are getting the replies or not. Using the pink test your computer system will be able to send the messages to the Wi-Fi Range Extender. Find out whether your extender is running or not you can check the status of the replies. If you are finding any difficulty or issue related to the wifi repeater 192.168.188.1 setup, consider making changes in the location of the extender.
Where is your WiFi range extender placed?
In case you have placed the extender nearby electronic gadgets and appliances such as refrigerators, air conditioners, microwaves, Mirrors, Bluetooth speakers, glasses, and more, experience the overlapping of signals of the extender and these gadgets.
To resolve these issues, you will need to locate your repeater at a place where it can easily transmit the amplified signals in all directions. Make sure to place the interference-creating objects away.
Power Cycle Your Linksys Extender:
It is always advised to consider the power cycle option if you want your extender to get a jump start on its network without deleting any of the customized settings.
- For this to happen, unblock the power cable of the repeater.
- Make sure your device takes some rest.
- Now you will need to connect your power code again with the extender after some time.
- Turn the device on and have a look!
In case none of the above-mentioned troubleshooting tips work for your extender, then it is high time that you should think about resetting the device. You can do that using the reset button on your repeater. After the reset process is over, you will see that all the customized settings of the extender are deleted automatically and the device has been restored to its default factory settings. This is the easiest way to tackle all the major technical issues.